Showing posts with label sawtooth hanger. Show all posts
Showing posts with label sawtooth hanger. Show all posts

Saturday, December 2, 2023

It sank; "Necessity is the mother of invention"

This blog doesn't have much to do with my paintings per se, but rather to document of how to mitigate a problem that shouldn't have happened in the first place. 

The 2 pieces of paintings of dancing movements, which I had mounted in a float presentation are ready to be on public display.


I had alluded to my various attempts to try to circumvent the visibility issue of the hanging wires and finally settled on using clear fishing lines, hoping that nobody would notice them, or at least not mind.

Well, I was wrong, and I am wrong.

The curator takes one scan, just a glancing look, and says "Those lines got to go."

"So I have 2 D-rings on the back of the frame, perhaps you can use 2 wires to suspend the frame?"

"No!"

"Sawtooth?"

"No!"

"Why not?"

Perhaps the curator is thinking of the hammered in sawtooth clips to have such reservations about sawtooth hooks.  Whatever the reason, this is almost universal now for art venues to demand that accepted pieces must be ready to hang, and no sawtooth hangers are allowed.  Along with no Styrofoam peanuts as packing material.  

I can sympathize with the nuisance of dealing with styrofoam peanuts, I've chased a few errant peanuts myself, but there are sawtooth hangers that are screwed-in, and they should be as sturdy as D-rings, especially if the correct weight rating is adhered to.  But, what do I know.  I'm only guessing.  

So I try to enlighten myself on the internet and see if I can find pertinent information regarding what ready to hang means.

"Ready to hang means that artworks must arrive with a suitable hanging system attached. This includes fixings such as “D” rings with cord or picture wire strung between."

My mission, should I accept it, is to fashion a device that is sturdy enough to hang my float and is hidden from the front view.

I am trying to make my hanging "hook" out of the existing D-rings.  Perhaps this is one way to associate my homemade hook with the well accepted D-ring, so there is no second-guessing. 


I am using two tabs to latch onto the "D" ring itself, such that it is kept secured and locked in at the center position.  I am bending the "D" ring at the vertical midline to make room for the hanging hook.
For all this to line up in a geometrically correct position, I am crimping one of the attachment tabs to accommodate the round side of the "D".


I am making a note of the center of the frame.  This is where I am going to locate my homemade "hook".



After careful positioning of the tabs, screws from the original D-rings are used to secure the homemade attachment contraption. 


No more visible hanging wires!


I am now using a smaller hanging hook on the wall, such that the hook itself is hidden from view.



I must admit, this is a cleaner and more professional look!

The takeaway from this experience is that I should have known better.  Despite my efforts of trying to make the float paintings "float", I was still cutting corners by using fishing wires as hanging wires.  Obviously the only person fooled was myself!

It takes a third party, someone who can decide on the fate of these two floats, to object to the fishing lines to nudge me to not accept anything that is less than "acceptable".  I've come to appreciate the saying "necessity is the mother of invention" even more.

Thank you, curator!